Macro Lens

Canon RF 100mm F2.8L Macro IS USM

Specifications

Specifications

  • 1.4x Macro magnification1

    Revealing hidden detail

  • Spherical Aberration Control

    For the ultimate control over bokeh and soft focus

  • F2.8

    For great performance in all situations

  • Dual Nano USM

    For smooth, fast and near silent focusing

  • Up to 5-stops2 optical Hybrid Image Stabilizer

    Exceptional stability in low light levels

  • Lens Control Ring

    Change settings while still viewing the subject

Specifications in detail

Optical Features / Specifications

  • Image Size
    Full Frame
  • 35mm Film Equivalent Focal Length (mm)
    100
  • Angle of View (Horizontal, vertical, diagonal)
    20°, 14°, 24°
  • Lens Construction (Elements/Groups)
    17 / 13
  • Number of Diaphragm Blades
    9
  • Minimum Aperture
    32
  • Closest Focusing Distance (m)
    0.26
  • Maximum Magnification (x)
    1.4
  • Distance Information
    Yes
  • Image Stabilizer OIS1
    5-stops2 (2-stops at 1.0x magnification, under Canon test standards)
  • Image Stabilizer IBIS x OIS3
    8-stops4
  • AF Actuator
    Dual Nano USM

Accessories

  • Lens Cap
    E-67 II
  • Lens Hood
    ET-73C
  • Lens Case/Pouch
    LP1222
  • Rear End Cap
    Lens Dust Cap RF
  • Magnification with Extension Tube EF12 II
    Not Compatible
  • Magnification with Extension Tube EF25 II
    Not Compatible
  • Extender Compatibility
    Not Compatible
  • Other Accessories
    Macrolite Adapter 67 (optional),
    Tripod mount ring E (B) with adapter (optional)

Physical Specifications

  • Dust/Moisture Resistance
    Yes5
  • Filter Diameter (mm)
    67
  • Max. Diameter x Length (mm)6
    81.5 x 148
  • Weight (g)
    685

Although the lens features dust- and water-resistant construction, this cannot completely prevent dust or water droplets from entering the lens.

  1. Tested under CIPA standards. Lenses released after July 2024 tested under CIPA-2024 standard in the yaw/pitch (+ roll in case of IBIS) directions at maximum focal length, with a specific camera.
  2. Tested under CIPA standards
  3. Tested under CIPA standards. Lenses released after July 2024 tested under CIPA-2024 standard in the yaw/pitch (+ roll in case of IBIS) directions at maximum focal length, with a specific camera.
  4. Tested under CIPA standards
  5. Lenses with dust/moisture resistance are fitted with a rubber ring on the lens mount which may cause slight abrasion of the camera mount. This in no way effects either the lens or camera performance.
  6. Lens dimensions when in retracted state